Welcome to the worldwide shop of the KKmulticopter

     
  Gimbal / Steadicam  
  MCFC  
  MultiWii  
  KKMultiCopter  
  Body Sets  
  Center Parts  
  Frame  
  Motor, ESC, Propeller  
  Other Parts  
 
 
 Manager - PC  
 Manager - Android  
 
 
 Setting Manual  
 Firmware  
 Ground Station  
 Android  
 
 
 Setting Manual  
 Firmware  
 
 
 Setting Manual  
 Videos  
 Micro MultiCopter?  
 How to build?  
 Folding frame  
 FlyCam Forum  
 Micro Forum  
 KK Forum  
 Firmware(Black)  
 Firmware(Blue)  
 How to update  
 
 
 Setting Manual  
 Carefree  
 GPS Carefree  
 Firmware  
 
     

  E-mail
  
 
 
 
 
 
 
 Information

Name

FlyCam Black32(Wii) Set
Price $ 145.00
Stock have a stock
Ships to Worldwide
View Counts 10,810
 

 Description
FlyCam MultiCopter Controller " Black-32 " + FlyCam GPS

Features
  • Modern 32-bit ARM processor running at 3.3V/72MHz.
  • 2000 degrees/second 3-axis MEMS gyro, accelerometer(MPU6050)
  • 3-axis magnetometer (HMC5883L) and pressure sensor(MS5611).
  • Support Quad-, Tri-, Hex-, Octo-, various coaxial configurations, as well
  • As fully customizable motor mixer for any multicopter type.
  • 8ch RC input-On board PPM convert for Standard, CCPM, Spektrum satellite, S.BUS
  • Battery voltage monitoring and low voltage alarm.
  • Modern 32-bit processor running at 3.3V/72Mhz
  • FrSky telemetry transmission support. (on board converting circuit for FrSky receiver)
  • MultiWii-based configuration software and GUI for easy setup
  • Support SWD(Jtag) easy debug
  • Open Source
  • Easy connecting FLYCAM-GPS(ublox)
  • Support FLYCAM OSD
  • Extended SPI Port( it can be add SD-CARD or Optical Flow sensor by user)
  • Extended I2C Port
Flight mode
  • Acrobatic, Auto-level, Altitude hold ,Heading hold, Carefree( Basic flight mode)
  • GPS position hold(optional, need GPS)
  • Return to home(optional, need GPS)
Size
  • Dimension : 50 X 50 mm
  • Mounting hole spacing : 45mm
  • Hole diameter : 3mm
  • Weight : 16 grams (All headers)

FlyCam Black32 Set Includes
  • FlyCam Black32(Wii) board
  • USB to Serial
  • Jumper cable (8 pieces)
  • LED/Buzzer
  • FlyCam GPS
WARNNING. Do not use this board for commercial aerial photography or the purpose which can be dangerous to the user is responsible for using.
WARNNING. the firmware is based on STM32 development environment and the AVR is not supported.



 
Address   815 SM Plaza, 460-3 Samsan-dong, Bupyeong-gu, Incheon, Rep of Korea
Name  Minsoo Kim       
Copyright (c) MultiCopter Worldwide Shop All Rights Reserved.